Gehl CTL55, Operator'S Manual

Page: 125 / 202

123
MAINTENANCE
After First 50 Hours (New Machines Only)
Replacing the Engine Oil and Oil
Filter
WARNING
Stop the engine and allow the machine to
cool before performing maintenance.
�
The engine, muffler, radiator and many
other parts of the machine are hot
directly after the engine is stopped.
Touching these parts will cause burns.
�
The engine oil is also hot.
Be careful when loosening caps and
plugs. Working on the machine under
these conditions could result in burns.
1. Open the engine hood.
2. Tilt up the ROPS.
Refer to page 151, “Tilting Up the
ROPS.”
3. Remove the oil supply cap (2).
4. Place a pan under the under cover (3).
5. Loosen the bolts and remove the under
cover (3).
6. Remove cap (A), install connector (B) and
drain the oil. (The oil comes out when the
screw is tightened.)
7. Remove connector (B) and install cap (A).
IMPORTANT: Check the waste oil. If it
contains large amounts of metal powder,
consult a Gehl dealer.
8. Install the under cover (3).
< CTL55 >
< CTL65 / CTL75 >
< CTL85 >
9. Using a filter wrench, turn the filter (4)
counterclockwise and remove it.
L H 1
2
T7G005
A B
3
T7G0111