Gefen GTB-MHDMI1.3-442 User Manual Download

Page: 6 / 29

HDMI 1.3 Features

•

225 MHz (up to 12 bit YUV 444 @ 1080p)

• Deep

Color

•

Dolby TrueHD and DTS-HD Master Audio

• Lip

Sync

Features

•

Displays any of four (4) Hi Def sources on the two (2) HDTV displays,
independently.

•

Maintains beautiful, sharp HDTV resolutions up to 1080p and 2K.

• 3DTV

Pass-Through

•

EDID Management for rapid integration of sources and display devices.

•

Supports digital audio formats including LPCM 7.1 audio, Dolby Digital Plus,
Dolby TrueHD, and DTS-HD Master Audio.

•

Built-in IR Extender.

•

IR Remote Control.

•

RS-232 serial control.

•

Locking HDMI connections.

• Firmware

fi eld-upgradable.

• Wall-mountable.

•

This product is HDCP-compliant.

Package Includes

(1) GefenToolBox 4x2 Matrix for HDMI
(4) 6 ft. HDMI cable (M-M)
(1) IR remote control
(1) 5V DC Locking Power Supply
(1) User Manual

FEATURES

Summary of Contents for GTB-MHDMI1.3-442






























Search results

Summary of Contents for GTB-MHDMI1.3-442

Reviews:

Related manuals for GTB-MHDMI1.3-442

Brands by name

Popular brands

Gefen GTB-MHDMI1.3-442, User Manual

Search results

Summary of Contents for GTB-MHDMI1.3-442

Reviews:

Related manuals for GTB-MHDMI1.3-442

Brands by name

Popular brands