12
How to change the IR channel
Use the following procedure to set the proper IR channel on the 4x2 Matrix for
HDMI.
1
Press and hold the Out 1 button for 5 seconds to enter IR channel selection
mode. The bank of blue LED indicators will now display the currently
selected IR channel.
2
Press the Out 1 button to cycle through each IR channel. The currently
selected IR channel will be indicated by a fl ashing blue LED. IMPORTANT:
The selected IR channel
must
be the same as the IR channel set on the IR
Remote (page 11). Refer to the table below for setting the IR channel.
3
Once the proper IR channel has been selected, press and hold the Out 1
button to confi rm and exit IR channel selection mode. The currently selected
input source will now be indicated.
IR Channel Table
Input LED
IR Channel
1
1
2
2
3
3
4
4
CHANGING THE IR CHANNEL
