Gefen GTB-MHDMI1.3-442 User Manual Download

Page: 27 / 29

SPECIFICATIONS

Video Bandwidth ...................................................................................... 225 MHz

Pixel Clock / Speed .................................................................................. 165 MHz

Maximum Video Resolution ............................. .1080p, 2K with 12-bit Deep Color

Input Video Signal .................................................................................... 1.2V p-p

Input DDC Signal ............................................................................... 5V p-p (TTL)

HDMI Connector ................................... type A 19 pin female; (4) input, (2) output

LED Indicators (source mapping)................................................................8 (blue)

LED Indicator (power)....................................................................................1 (red)

RS-232 Interface............................................................................... DB9 serial (F)

IR Extender...............................................................................3.5mm Mini-Stereo

Power Supply .............................................................................................. 5V DC

Power Consumption ............................................................................. 13W (max)

Dimensions .................................................................................. 3”W x 9”H x ¾”D

Operating Temperature ............................................................................ 0 - 40° C

Shipping Weight .............................................................................................4 lbs.

Available Colors.................................................................................Ivory or Black

Compliancy.............................US/EU Standards, HDMI 1.3, HDMI 1.2, HDCP 1.1,

and DVI 1.0

Certifi cations.............................................................UL (power supply), RoHS, CE

Summary of Contents for GTB-MHDMI1.3-442






























Search results

Summary of Contents for GTB-MHDMI1.3-442

Reviews:

Related manuals for GTB-MHDMI1.3-442

Brands by name

Popular brands

Gefen GTB-MHDMI1.3-442, User Manual

Search results

Summary of Contents for GTB-MHDMI1.3-442

Reviews:

Related manuals for GTB-MHDMI1.3-442

Brands by name

Popular brands