7
RECEIVER UNIT DESCRIPTIONS
1 IR
Sensor
Receives signals from the Hi-Def source IR remote control. The IR signals are
sent back to the source device, when using an IR Blaster on the Sender.
2
Locking HDMI Port
Connect a Hi-Def source device to this HDMI port.
3 Power
Indicator
This LED will turn bright red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
4
5V DC Locking Power Connector
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
5
IR Extender Port
Connect an IR Extender (Gefen part # EXT-RMT-EXTIR) cable from this port to
the Hi-Def source to extend the IR control.
6
Ethernet Output Jack
Connects the receiver unit to the network device.
7
CAT-5 Input Jack
Connects the Sender to the Receiver unit using CAT-5 cabling.
