5
SENDER UNIT DESCRIPTIONS
1
5V DC Locking Power Connector
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
2 Power
Indicator
This LED will turn bright red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
3
Locking HDMI Port
Connect a 3D Hi-Def source device to this HDMI port.
4
CAT-5 Output Jack
Connects the Sender to the Receiver unit using CAT-5 cabling.
5
Ethernet Input Jack
Connects the Sender to the network using Ethernet cabling.
6
IR Blaster Port
Connect an IR Blaster cable (Gefen part # EXT-2IREMIT) from this port to the
Hi-Def source to control the source from the viewing location.