8
1.
Connect the Hi-Def source to the Sender Unit using the included HDMI cable.
2. Use an HDMI cable to connect the HDTV display to the Receiver Unit.
3. Connect the Ethernet device/router to the Ethernet input port on the Sender
unit using a CAT-5, CAT-5e or CAT-6 cable. Connect the Ethernet output port
on the Receiver Unit to the remote device/router with a CAT-5, CAT-5e or
CAT-6 cable.
4. Use a CAT-5 or CAT-6 cable up to 330 ft (100 meters) to connect the Sender
Unit and Receiver Unit.
NOTE:
If terminating network cables in the fi eld, please adhere to the
TIA/EIA568B specifi cation. See Page 11 for details.
5. Connect the included 5V DC Locking Power Supplies to the Sender Unit and
Receiver Unit. Do not overtighten the locking connectors. Plug the two power
supplies into an available electrical outlet using the included AC power cords.
The Sender and Receiver units will now power up.
NOTE:
If the power LED indicator on the receiver unit is not on, check to
make sure that the CAT5 cables are not crossed (Ethernet to Link instead of
Ethernet to Ethernet, for instance).
6. Power on the HDTV display and the Hi-Def source. A vibrant HD picture will
be displayed along with multichannel digital audio (if supported by the display).
CONNECTING THE EXTENDER FOR
HDMI 1.3 OVER CAT5 WITH ETHERNET
EXT-HDMI1.3-CAT5-ELR
CAT5 ETHERNET CABLE
CAT5 LINK CABLE
(Up to 300 ft)
Sender
HDMI Source
Ethernet Source
Receiver
HD Display
HDMI CABLE
