Page Title
page | 4
Installation
The
Digital Signage Player with Wi-Fi
can be connected directly to a network using an
Ethernet cable or using Wi-Fi.
1. Connect the included Wi-Fi antenna to the Digital Signage Player.
2. Connect an HDMI cable between the display and the HDMI connector on the Digital
Signage Player with Wi-Fi.
3. If Wi-Fi will not be used to connect the
Digital Signage Player with Wi-Fi
, then connect
the included Ethernet cable from the Ethernet jack on the
Digital Signage Player with
Wi-Fi
to the network.
4. Connect a keyboard to the USB port on the back panel of the Digital Signage Player.
5. Connect the included 12 V DC power supply to the unit and connect the AC power
cord to an available electrical outlet.
Sample Wiring Diagram
NOTE:
The GPIO PCB is sold separately. See
GPIO PCB
Installation
for information on installing and connecting the GPIO
PCB board.
Digital Signage
Player w/Wi-Fi
Signage Manager Software
Microswitches
GPIO
Digital Signage
Player w/Wi-Fi
Wireless Router
Supports Wired or Wireless Connection
Digital Signage
Player w/Wi-Fi
EXT-HD-DSWFN Configuration #1
CAT-5 / ETHERNET CABLE
VIDEO OUTPUT
USB INTERFACE
CONTACT CLOSURES
Getting Started
