page | 2
Front
ID
Name
Description
1
AV out
Connect the included 3.5mm-to-Component
cable to this jack
2
Reset
Press this button to perform a system reset.
See
Restoring Factory-Default Settings
for
more information.
3
Status
The green LED indicates that the unit is
powered. The yellow LED indicates data
flow but is primarily used when performing a
factory reset on the unit.
4
Ethernet
Connect an Ethernet cable between the port
and the network router or switch.
5
USB
Connect a USB keyboard and flash drive to
these ports to configure the Digital Signage
Media Player with Wi-Fi.
6
CF Slot
Remove this cover to insert a flash card and
replace the 4 GB of internal storage.
The Digital Signage Player supports up to 16
GB of storage space.
7
Wi-Fi antenna
The included Wi-Fi antenna must be
connected in order for the device to work
properly. The Wi-Fi antenna must be
connected before the unit is powered.
Panel Layout
4
7
5
6
2
1
3
Getting Started
