manualshive.com logo in svg

Gefen EXT-DP-EDIDP, User Manual, Page: 30 / 56

Share
Download
Gefen EXT-DP-EDIDP User Manual Download Page 30

page | 20

Connecting the DisplayPort Detective Plus

When the 

DisplayPort Detective Plus

 is connected to a computer running the Windows® 

operating system, a vitual communications port is created.  Macintosh computers are also 

supported.

1. 

Connect the USB-to-Mini USB cable between the detective and the PC.

2. 

The COM port driver will automatically be installed.

3.  Go to 

Control Panel

 > 

Device Manager

 and click 

Ports

 to see the driver. 

The driver will be identified as 

DP-Detective

, as shown below: 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.  Refer to 

Installing the DisplayPort Driver

, if driver is not present or is listed as an  

unknown device.

5.  Launch the terminal-emulation program and set the terminal-emulation program to 

use the COM port specified next to the driver.  In the example, above,  COM 9 has 

been automatically assigned by the driver.

Advanced Operation

Using the Virtual COM Port

Set the terminal program to 

use the specified COM port

Summary of Contents for EXT-DP-EDIDP

























































Reviews:

No comments