12
ADJUSTING THE SIGNAL QUALITY
Adjusting the Signal Quality
The
2x Dual Link DVIKVM Extender Over CAT-6a
Receiver unit has two trim pots
(trim potentiometers) to compensate for the extension distance and the quality/skew
variances that are found in different CAT-6a cabling brands.
EQ 1
adjusts the output
signal for
DVI Out 1
and
EQ 2
adjusts the signal for
DVI Out 2
. If there is no output
video or if output video contains video artifacts and/or video noise such as snow,
use the steps below to adjust the trim pot.
1.
Insert a small flat-headed tool into each of the trim pots on the front panel of
the
Receiver unit.
2.
Each trim pot has 8 set positions. Turn the trim pot in a clockwise fashion
until it clicks to the next position. Continue adjusting the trim pot by trying
all 8 positions until the issue is resolved.
3.
Carefully remove the adjustment tool.
Trim Pot
Trim Pot
IMPORTANT:
Any time a cable is changed-out or replaced, the trim
pots on the Receiver unit will need to be adjusted.
