11
DIP SWITCH CONFIGURATION
DIP Switch 2: +5V for Fiber Optic Extenders
• ON - 5V
5V for DVI fiber optic extenders.
• OFF (default) - D5V
D5V for DVI fiber optic extenders.
DIP Switch 3: DVI Support*
DIP switch 3 is only functional when DIP switch 1 is set to OFF (Local EDID).
• ON - DVI Mode
If a DVI connection is used, set DIP 3 to the ON position. DVI is supported
by disabling HDCP pass-through.
• OFF (default) - HDCP Pass-Through
If HDMI is connected, set DIP 3 in the OFF position.
DIP Switch 4: Not used
•
Reserved for future expansion.
IMPORTANT:
After changing DIP switch 1 or DIP switch 3, the
Sender unit must be power-cycled for the changes to take effect.
