7
1 EQ 1
The EQ adjustment (trim pot) for
DVI Out 1
. Both
EQ 1
and
EQ 2
compensate
for the extension distance and the quality/skew variances that are found in
different brands of CAT-6a cables.
2 EQ 2
The EQ adjustment (trim pot) for
DVI Out 2
.
3 Power
The LED power indicator will glow bright red once the included 5V DC power
supply is properly connected between the unit and an available electrical outlet.
4 Link 2.1
Connect a CAT-6a cable between this port and the
CAT-6 / Link 2.1
port on the
Sender unit.
5 DVI Out 2
Connect a dual-link cable from this connector to the a DVI display.
6 Link 2.2
Connect a CAT-6a cable between this port and the
CAT-6 / Link 2.2
port on the
Sender unit.
7 USB Out (1 - 4)
Connect up to four USB devices to these ports.
8 USB Out LED (1 - 4)
Each of these LED indicators will glow bright green once a USB device is
connected to the USB port.
9 USB Link
Connect a CAT-6a cable between this jack and the
USB Link
jack on the
Receiver unit.
10 Host LED
This LED indicator will glow bright green when a CAT-6a cable is connected
between the USB Link ports on both the Sender and Receiver unit.
11 Link 1.1
Connect a CAT-6a cable between this port and the
CAT-6 / Link 1.1
port on the
Sender unit.
12 DVI Out 1
Connect a dual-link cable from this connector to the a DVI display.
RECEIVER UNIT DESCRIPTIONS
