6
MATRIX DESCRIPTIONS
Front
1
LCD Display
This is a two-line, sixteen-character display that shows status information and is also used
to manage display / source routing.
2
Navigation Buttons
Used for routing and adjusting settings of the
8x8 Matrix for HDMI w/8 ELR-POL Outputs
.
See the information beginning on page 15 for details on using these buttons.
3
Menu
Press this button to display routing, switching mode, and IP address information.
4
IR Sensor
Receives signals from the IR Remote Control
.
5
Lock Indicator
This LED glows bright blue when the front panel is locked.
6
Lock Button
Pressing this button temporarily locks the front panel controls.
7
Power Indicator
This LED indicator will glow bright blue when the matrix is powered on. When the matrix
is in standby mode, this LED indicator will glow bright red. The power switch, on the back
of the matrix, must be switched to the the ON position in order for this LED indicator to
function.
8
Power Button
Press this button to power-on and power-off the matrix.
