Geckoplex EP-5, Owner'S Manual

Page: 11 / 16

MIDI Channel and MIDI Clock Mode
First Then
Hold
At Startup
The PRESET switch cycles through the MIDI channels. The level meter
LEDs display the selected channel as a binary number as follows:
•
------
NONE (MIDI Disabled)
•
OOOOOO
ALL (default)
•
-----O
Channel 1
•
----O-
Channel 2
•
----OO
Channel 3
•
---O--
Channel 4
•
---O-O
Channel 5
•
---OO-
Channel 6
•
---OOO
Channel 7
•
--O---
Channel 8
•
--O--O
Channel 9
•
--O-O-
Channel 10
•
--O-OO
Channel 11
•
--OO--
Channel 12
•
--OO-O
Channel 13
•
--OOO-
Channel 14
•
--OOOO
Channel 15
•
-O----
Channel 16
The TAP switch will toggle MIDI clock master/slave mode as follows:
• LED off – Off mode. The Geckoplex will ignore any incoming MIDI
clock messages but will pass them thru to the output.
• LED on – Receive mode (default). The Geckoplex will sync its delay
time with incoming MIDI clock messages, unless the delay is already
locked by the tap-tempo. The
SUBDIV switch setting will affect the
delay time set from the MIDI clock. Set SUBDIV to the quarter note
setting to get a 1:1 time sync with the MIDI clock.
• LED flashing – Master mode. The Geckoplex will output clock
messages generated from its own current delay time setting for
downstream devices to sync to. Any incoming MIDI clock messages will
be ignored and will not pass thru to the output.
The ON switch stores the settings and resets the unit.
Advanced Configuration
(Continued)
Expression Pedal Function in SOS Mode
First Then
Hold
At Startup
The PRESET switch selects the expression pedal function in SOS mode:
• 1 LED on – Pedal controls the loop playback volume (default).
• 2 LEDs on – Pedal controls the loop playback speed.
• 3 LEDs on – Pedal controls the loop degradation speed.
The ON switch stores the new settings and resets the unit.
11