Advanced Configuration
The Geckoplex allows certain settings and functionality to be configured
through startup menus. These settings include:
●
The max delay time
●
The off-state output mode (buffered or bypassed)
●
MIDI channel and MIDI clock settings
●
The expression pedal function in SOS mode
Overview:
Enter the startup menus by holding down certain switches during power-on.
●
ON
to change the max delay time and output buffer mode.
●
PRESET
to change MIDI channel and clock output mode.
●
TAP
to change the SOS expression pedal function.
●
ON + TAP + PRESET
to restore the unit to default settings.
Then, adjust the desired settings using
PRESET
and
TAP
switches.
Finally, press the
ON
switch to save the settings and reset.
Max Delay Time and Off-state Output Mode
First
Then
Hold
At Startup
The
PRESET
switch selects the maximum delay time as follows:
•
LED 1 on
– 650 ms max (same as EP tape machines)
•
LED 2 on
– 1 second max (default)
•
LED 3 on
– 2 seconds max
The
TAP
switch toggles the off-state output mode as follows:
•
LED on
– Buffered Mode (default). The preamp and
GAIN
knob are
always active and outputs are always buffered, even with the unit
switched off. Required for
TRAILS
to function.
•
LED off
– Bypass Mode. The unit is fully bypassed from the signal path
while the unit is switched off. The
GAIN
knob has no effect, and no
TRAILS
will be heard after switching the unit off.
The
ON
switch stores the new settings and resets the unit.
Restore All to Factory Default Settings
First
Then
Hold
+
+
At Startup
All settings are restored to their original factory
default settings. This includes all presets. All
LEDs will quickly flash to indicate that the
defaults are restored.
10
Summary of Contents for EP-5
Page 1: ...Owners Manual...
Page 16: ...geckopedals com eck edal...
