GeChic On-Lap 1305H, Manual

Page: 11 / 36

The min. viewing angle of vertical display is
60 degrees.
Do not attach the magnetic buckle higher than
the
orange line , or it may cause
the monitor overturning.
Section 2 Installation of Vertical Display
As the fig. below, rotate aside the Cover Lock firstly, and take out the monitor,
then trun the monitor's back side to the Protective Cover . Do keep the but-
tons on the topside.
○
1
Put the
bottom half of the monitor into the
Protective Cover,
○
2 Put the top half
of the monitor into the Indentation
of the Protective Cover. Rotate
down the Clover Lock.
As the fig. below, connect On-Lap 1305 to a laptop. On-Lap 1305 can be
powered on through a USB port or 5V2A adapter. The video
input source is
"HDMI 2" .
4