Geberit ECO 201, Operating Instructions Manual, Page: 16 / 268

Operating instructions ECO 201
Function
1 Green LED
1 2 3
2 Red LED
3 Start button
4 Stop button (emergency
off)
4
Automatic pressing function
An automatic pressing function ensures that the pressed joint is
completely finished. For safety reasons, the automatic pressing
function is not activated until a certain press capacity has been
attained (after approx. two seconds). Following this, the pressing
operation takes place automatically and can only be interrupted by
pressing the stop button.
LED indicator
The two LEDs show the operating statuses of the pressing tool. The
pressing tool is ready when the green LED is lit. The red LED
indicates a malfunction (see the "Troubleshooting" chapter).
Stop button
The stop button has two functions:
• Switching off the motor
• Cancelling the malfunction indicator
Signal tone
A signal tone sounds six times in case of malfunctions or if the
pressing has not been completed correctly.
B
299
-00
1
&BDC © 02
-20
0
6
16