![background image](http://html2.mh-extra.com/html/geberit/aquaclean-8000plus/aquaclean-8000plus_operating-instructions-manual_4008666024.webp)
Operating instructions Geberit AquaClean 8000
plus
24
Water is dripping onto the
floor
There is a leak
Switch off the shower toilet.
Cut off the water supply and pull
out the mains plug. If the power
outlet and the water supply valve
are located inside the casing,
contact customer service
Red LED on control panel is
lit
Active carbon filter is spent and /
or nozzle cleaner tank is empty
(see remote control display,
flashing icon)
Replace the active carbon filter
(art. no. 250.022.00.1) and / or
top up the nozzle cleaner tank
with nozzle cleaner (art. no.
250.028.00.1)
Red LED on control panel is
flashing and [Error] is
displayed on the remote
control
A safety device has switched off
the shower toilet for a short
period
Switch the power switch off and
back on again after 30 s
Malfunction
Malfunction
Malfunction
Malfunction
Cause
Cause
Cause
Cause
Fault clearance
Fault clearance
Fault clearance
Fault clearance
Replacing the remote control batteries
The remote control requires 3 batteries (type 1.5 V LR3 / AAA).
Stand next to the shower toilet so that the remote control is detected.
1 Slide the cover of the remote control up until the stop position is reached.
2 Press down the catch, remove the cover and replace the batteries, ensuring the
correct polarity.
Summary of Contents for AquaClean 8000plus
