![background image](http://html2.mh-extra.com/html/geberit/aquaclean-8000plus/aquaclean-8000plus_operating-instructions-manual_4008666010.webp)
Operating instructions Geberit AquaClean 8000
plus
10
Integrated control panel
<Shower>, starting and stopping
Press the button: The spray arm moves into position and the
shower procedure starts. The shower automatically stops
after 20 s.
You can stop the shower before this by pressing the
<shower> button.
Press the button again: The shower stops.
<Spray intensity>
Adjust the sliding button during the shower procedure to
change the spray intensity of the anal shower or the lady
shower.
There are 7 spray intensity levels to choose from.
<Odour extraction unit>
Prerequisite: Odour extraction unit is switched on.
The odour extraction unit starts as soon as someone sits
down on the toilet.
Press the button: The odour extraction unit stops.
Press the button again: The odour extraction unit starts.
<Drying>
Prerequisite: Drying is activated.
Drying starts after the shower procedure and stops as soon
as you stand up. You can interrupt drying before this by
pressing the <drying> button.
Press the button: Drying stops.
Press the button again: Drying starts.
Blue LED
Meaning
Lights up
Heating element is switched on. In economy mode (factory
setting), the heating element only switches on if user
detection is activated. The warm-up time is 3 to 4 minutes.
Does not light up
Heating element is switched off
Red LED
Meaning
Lights up
Replace active carbon filter or refill nozzle cleaner
Flashing
Error message (see "Troubleshooting")
Summary of Contents for AquaClean 8000plus
