Packing list
7
GeBE E + F GmbH • www.gebe.net • GeBE Doc.No.: SMAN-E-657-V1.4 Thermal Printer GPT-4672/4673
4 Packing list
4.1 Unpacking
Please check during the unpacking process that all
parts have been delivered completely and undamaged.
Make sure to remove all parts from the packaging
material. Claims for damages caused during transport
can only be asserted, if the carrier is informed without
delay. Please prepare a survey report and send it back
to the supplier along with the damaged part.
Standard versions of the thermal printers
in 2" or 3" width for OEM are supplied without
accessories. Please order those separately.
All current documents are listed on the Internet at
www.oem-printer.com/info.
User manuals for the GeBE thermal printer controllers
installed in the printer can be requested from GeBE via
email ([email protected]).
4.2 Standard accessories:
• 1 roll of thermal paper matching the printer width
• interface cable for RS232 or USB
• power supply
• fastening screws
4.2.1 Standard paper
A=outside coating, WR=water resistent:
• GPR-T01-060-070-025-080A/WR:
50 pcs. thermal paper rolls w: 60 mm, th: 80 µm,
diameter: 70 mm, core diameter: 25 mm, life: 7 years
• GPR-T01-082-070-025-080A/WR:
50 pcs. thermal paper rolls w: 82 mm, th: 80 µm,
diameter: 70 mm, core diameter: 25 mm, life: 7 years
Which thermal paper is suitable?
The printers are specified for 51-61 mm and 60-82 mm
(+/- 0,5 mm) paper widths, up to 200 µm paper
thickness.
Other papers may cause failures:
Thermal papers that are resistant against water, grease,
or alcohol are available for special applications. We will
gladly assist you in selecting the right thermal paper for
your purposes.
Which side of the thermal paper can be printed on?
When in doubt, try the finger nail test: Quickly run the
tip of a finger nail across the paper, applying pressure.
The friction heat will cause blackening on the thermo
sensitive side.
4.2.2 Cables
• GKA-245-1-500
power supply, 2 single wires, 1.0 mm
2
,
500 mm, one end open, wire end sleeves
• GKA-406-2-1000
round cable, 1,000 mm, 5pin to JST plug at
controller, with 9 pin SUB-D socket to RS232
interface at the host (PC)
• GKA-570-USB-FS-MOLEX-2,0 m
cable USB to Molex, length 2.0 m, for full speed
transmission
• GKA-xxx2
Cable Near-Paper-End-Sensor for GPT-4672 with
6pin. plug on socket 6157M06-R
• GKA-xxx3
Cable Near-Paper-End-Sensor for GPT-4673 with
3pin. plug on socket JST-S03-B-XH-A
4.2.3 Power supply
• GNG-24V-6.5A-AC:
open frame power supply 24 V / 6,5 A
4.3 Driver software
Printer controller GCT-4692/4693 is supported by the
following Windows® drivers:
Windows® CE.Net 4.2, 5.0, Windows® 2000, and XP.
The driver software can be downloaded from the
internet: www.oem-printer.com/info
