Safety Instructions
3
1.2 Device information
TIP
•
The device may only be opened or repaired by
authorized personnel. Never open the device or
carry out repairs yourself. Always contact an
authorized technical service. You can find all
necessary service information in the chapter
"Service and Maintenance".
•
Before the device is turned on, make sure that the
system voltage of your installation matches the
supply voltage of the device. The device
characteristics are printed on the name plate and in
the technical data.
- The name plate is located on the underside of the
device.
- For the technical data of this device, refer to the
chapter "Technical Data".
•
Peripheral devices that are connected to the
interfaces and the DC circuits of this device have to
meet the requirements for low safety voltage in
accordance with EN/IEC 60950.
•
Switching off the device does not completely
disconnect it from the power supply. Your device is
only disconnected completely, when the power is
unplugged.
ATTENTION
•
Please make sure that the power supply cable is run
in
such a way that nobody trips over it, and it
cannot be damaged by other devices.
CAUTION
hot surfaces
•
During operation, surfaces in the surrounding area of
the print head may heat up. Therefore, direct contact
with the print head must be avoided to prevent
burning accidents. Do not put heat sensitive objects
close to this heat source.
GeBE E + F GmbH • www.gebe.net • GeBE Doc.No.: SMAN-E-657-V1.4 Thermal Printer GPT-4672/4673
Safe operation of this device is only warranteed, if
the instructions in this operating manual have been
complied with.
For installation: Always disconnect system power
supplies.
Only use manufacturer's parts and accessories.
TIP
•
Avoid constant high humidity and condensation.
Protect the device from being splashed and from
coming in contact with chemicals.
•
Only use spare parts and accessories supplied or
authorized by GeBE. The use of unauthorized parts or
accessories may considerably affect the function and
safety of the device. All parts included are listed in the
chapter "Packing List", while the original accessories
are listed in the chapter "Parts and Accessories ".
•
It is no longer possible to safely operate the device, if:
- the housing has been damaged due to mechanical
overload
- moisture reached the inside of the device
- smoke is coming from the inside of the device
- the power supply cord is damaged
- the device stopped working properly
Unplug or turn off the device immediately, when such a
failure occurs, and contact GeBE customer service. See
chapter "Service and Maintenance".
We explicitly state that all product liability and
guaratee claims are null and void, if the device has
not been used in accordance with the instructions in
this operating manual or on the device itself, or if it
has been used inappropriately.
