Description
4
GeBE E + F GmbH • www.gebe.net • GeBE Doc.No.: SMAN-E-657-V1.4 Thermal Printer GPT-4672/4673
2 Description
Small and Compact
The design of most kiosk terminals is continuously getting smaller. The printer INFO Compact Plus with variable
paper holder may be the ideal solution. The paper is unwound and transported down from an axle into the printer
mechanism. A fastener on the side prevents the paper roll from slipping off the axle. An optionally available near-
paper-end sensor reports the paper status. An adjuster allows setting of user-defined paper widths (see chapter
3, 11) until maximum 60/82 mm paper width.
Fast Printing
Various applications - especially in the public domain - require considerably faster data output. The new GeBE
INFO Compact Plus printer prints up to 200 mm per second, counteracting any impatient pulling on the paper by
the user and therefore, avoiding costly damage of printer mechanism or cutter.
GeBE Controller
Controller GCT-4692/4693, developed by GeBE and controlling these fast printouts, has been combined with a
robust printer mechanism to create a new product. The mechanics of this printer mechanism originates from the
established industrial printer module family INFO from GeBE. In addition to its speed, this fast, compact INFO -
printer for the kiosk area stands out due to high reliability, its service and application friendlyness.
Easy Customization through Software
Settings such as blackening, text size, RS232 control, etc. can be set up by the user. On request, command and
character set adaptations can also be performed at the factory.
Downloads
Firmware, fonts, logos, macros, settings, etc. can simply be sent as a file from the PC through the active inter-
face to the printer, where they are stored permanently.
