GEAX
s.r.l.
Chapter 2
TRANSPORTING THE DRILLING RIG
2
0
fig.2.5.4.1
4.
Push the lower part of the shaft to align it with the pass-through hole of
the drag device.
5.
Align the shaft so that the sliding guide can be inserted onto the support
rod.
6.
Turn the shaft so that it blocks on the inserts of the rotary
(detail of
fig.2.5.4.1
)
.
7.
Move the winch 2° down to insert the shaft in the drag device of the
rotary until the rope is loosened. Keep your hands away from the inlet
zone.
8.
Lower the mast
as in point 1
to unhook the rope of the winch 2°.