GEAX
s.r.l.
Chapter 2
TRANSPORTING THE DRILLING RIG
9
Proceed as follows to assemble the tip:
1.
Hook the tip to the rope of the secondary winch.
2.
Lift the tip a bit off the ground.
3.
Rest the tip on the ground so that the parts of the joint are aligned both
axially and with the surfaces of the hexagon.
4.
Lower the rotary-tool so that the parts of the joint meet.
5.
Insert the pin and secure the safety bolt.
6.
Unhook the rope of the winch.
In the work configuration, the winch 2° rope must be hooked to the
specific eyebolt and slightly tensioned
.
2.2.3
Assembling mast extension and centring device
When the drilling rig has been set up, before beginning the work shift the
lower mast support extension and the centring device of the tool must be
assembled. Use the winch 2° to handle the components (70 kg).