GEAX
s.r.l.
Chapter 2
TRANSPORTING THE DRILLING RIG
7
Align the mast vertically by acting alternately on the joystick D1 and on
the selector D2, being careful not to scrape the base of the mast
against the ground.
Act on the joystick D1 to achieve the perfect upright position of the
mast.
Re-activate all limit switches.
2.2.2
Assembling tool
The auger tool (in two parts + the tip) can only be assembled with the mast
upright. Assemble the upper part, the central part and then the tip.
Proceed as follows to assemble the upper part:
1.
Move the rotary to the intermediate position P
2
fig. 2.2.2.1
.
Fig. 2.2.2.1