FITTING TOM TOM DRUMS
TO THE BASS DRUM
ITEMS REQUIRED:
1x Tom Tom Drum (10” x 8”)
1x Tom Tom Drum (12” x 9”)
1x Bass Drum (20” x 16”)
2x Tom Tom Drum Arms
1.
Take the two tom drum arms and place them
into the holes on top of the bass drum. Have
them so the arms face away from each other.
Tighten the wing nuts on the bass drum to
secure them in place.
2.
Loosen both wingnuts on both tom arms,
and place the tom drums on to each arm. The
smaller tom (12”) goes on the left (if you are
looking at the kick skin without a logo) and the
larger tom (13”) on the right.
3.
Adjust the angle of each tom arm to your
desired position then tighten the wing nuts to
secure the drums and tom arms.
Note
– Memory locks have been put in place
on the tom arms, which makes setup easier.
These can be adjusted if required using the
drum key.
10
Summary of Contents for BDK-1
Page 1: ...FUSIONDRUMKIT SETUPGUIDE...
Page 2: ...FUSION DRUM KIT...
