❑
CY-12R/C
(V-Cymbal unit)
❑
Connection Cable
❑
Cable Tie
■
Owner's Manual (this manual)
❑
Wing Nut
❑
Felt Washer
❑
Stopper
Before using the CY-12R/C, you need to make the settings for the percussion
sound module (p. 2).
Contents of the Package
Names of the Components
Features
Bell Portion
Bow Portion
Edge Portion
BOW/EDGE Output Jack
BOW/BELL Output Jack
The superior design has taken into account not only the shape of the cymbal, but also the bounce of the stick, and
even the movement caused by playing. It can be used as a ride, crash, or splash cymbal.
•
Similar touch and feel as with acoustic cymbals
•
They're quiet!
When the CY-12R/C is used as a ride cymbal, you can play bell shots (p. 6); edge shots (p. 6) can be played when using
it as a crash cymbal.
You can also use choking techniques, whereby you stop the sound by grasping the cymbal edge with your hand (p. 7).
•
Separate tones in bow and edge, or bow and bell; choking possible
•
Compatible with all Roland percussion sound modules (p. 2)
•
Three way triggering and positional sensing are possible
(When using the TD-10 + TDW-1 with V-Cymbal Control) (p. 6)
Owner's Manual
Thank you, and congratulations on your choice of the Roland CY-12R/C V-Cymbal.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 3–4) and
“IMPORTANT NOTES” (p. 4). These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every
feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
Copyright © 2001 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
02892234 ’01-10-B3-11N
