Gear4 Renew SleepClock User Manual Download

Page: 6 / 36

User Manual | Renew SleepClock | GEAR4

GEAR4 | Renew SleepClock | User Manual

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert user to the

presence of uninsulated ‘Dangerous

Voltage’ within the product’s enclosure that may

be of sufficient magnitude to constitute risk of
electric shock to person.

The exclamation point within an
equilateral triangle is intended to
alert user to the presence of

important operating and maintenance
(servicing) instruction in the literature
accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

FCC RULES

You are cautioned that changes or modifications
not expressly approved by the part responsible
for compliance could void the user’s authority
to operate the equipment. This equipment has
been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15
of the FCC rules.

These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio frequency

energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:

‒ Reorient or relocate the receiving antenna.

‒ Increase the separation between the

equipment and receiver.

‒ Connect the equipment into an outlet on a

circuit different from that to which the receiver
is connected.

‒ Consult the dealer or an experienced radio /

TV technician for help.

Operation is subject to the following two
conditions:

1) This device may not cause interference and

2) This device must accept any interference,
including interference that may cause undesired
operation of the device.

www.gear4.com/register

Please ensure that your iPod touch / iPhone /
iPad is using the latest iOS version. To update
iOS, connect your iPod touch / iPhone / iPad
to iTunes. If there is a newer software version
available you will be prompted to upgrade.

Copyright © 2012 Disruptive Limited. All rights
reserved. Reproduction in part or in whole is
prohibited. GEAR4 and Renew SleepClock are
trade marks of Disruptive Limited. iPod touch,
iPhone and iPad are trade marks of Apple Inc.,
registered in the U.S. and other countries. iPad is
a trade mark of Apple Inc. App Store is a service
mark of Apple Inc. The Bluetooth

word mark

and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by
Disruptive Limited is under license.

"Made for iPod", "Made for iPhone" and "Made
for iPad" mean that an electronic accessory
has been designed to connect specifically
to iPod, iPhone or iPad respectively and has
been certified by the developer to meet Apple
performance standards.

Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.

WARNING

To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.

CAUTION

Use of controls or adjustments of performance
or procedures other than those specified may
result in hazardous radiation exposure.

UNPACKING AND INSTALLATION

Unpack your unit carefully. We recommend that
you save the packaging in case you ever need

to store your unit. To avoid damage, never place

the unit or its batteries near radiators, in front of

heating vents, under direct sunlight or near water.

FOR YOUR SAFETY

‒ When disconnecting the power supply, pull