93
Maintenance
Dismantling the Control Top into its Components
Fitting the Logic Element NOT (Sealing Package)
Requirement:
Logic element NOT is only provided in connection with the pneumatic block
T.VIS/NOT!
Carry out the following steps:
Fit the logic element NOT (64) in the reverse order.
!
Align the positioning peg (8.2) of the logic element NOT with the front right corner
and take care that the position of the O-rings (64.1) matches the holes (8.1) in the
pneumatic block.
Done.
NOTE
Faulty assembly may cause malfunctions, as the spring force backup is then not given.