Safety
Supplementary Regulations
12
Operating Instructions · Control Top T.VIS
®
M-15
Edition 2017-10-16
Each member of staff must meet the following requirements to be allowed to work on the
control top:
•
Personal qualification for the relevant task.
•
Sufficient professional qualification for the relevant task.
•
Instructed with regard to the function of the control top.
•
Instructed with regard to the operating sequences of the control top.
•
Familiar with the safety devices and their function.
•
Familiar with these Operating Instructions, especially with the safety instructions and
the information which is relevant for the task on hand.
•
Familiar with the basic regulations with regard to occupational health and safety and
accident prevention.
For work to be carried out on the control top the following user groups are distinguished:
Supplementary Regulations
In addition to the instructions in this documentation the following also has to be
observed:
•
pertinent accident prevention regulations,
•
generally accepted safety rules,
•
national regulations applicable in the country of use,
•
work and safety instructions applicable in the facility,
•
installation and operating regulations for use in potentially explosive areas.
User groups
Staff
Qualifications
Operating staff
Adequate instruction and sound knowledge in the following areas:
•
Function of the control top
•
Operating sequences of the control top
•
Behaviour in case of emergencies
•
Lines of authority and responsibilities with respect to the task
Maintenance staff
Adequate instruction as well as sound knowledge of the design and
function of the control top.
Sound knowledge in the following areas:
•
Mechanical equipment
•
Electrical equipment
•
Pneumatic system
Authorization with regard to safety engineering standards to carry out
the following tasks:
•
Setting devices into operation
•
Earthing of devices
•
Marking of devices
The relevant certificates of qualification must be submitted before work
can be carried out on ATEX certified machines.