19
Transport and Storage
Storage
Transport and Storage
Scope of Supply
On receipt of the control top check whether
•
the details on the type plate correspond to the data in the order and delivery docu-
ments,
•
the equipment is complete and all components are in good order.
Transport
For transport, the following principles apply:
•
Only use suitable lifting gear and slings for transporting the package units/control
modules.
•
Observe the pictograms on the package.
•
The synthetic materials of the control tops are susceptible to breaking. Take care
when transporting the control top. Do not grip sensitive parts of the unit to lift or push
the unit or to support yourself.
•
The permanent magnet on the switch bar is fragile and must therefore be protected
against mechanical impact.
Storage
If, during transport or storage, the control top is going to be exposed to temperatures
≤
0
°C, the control top must be dried and suitable measures be taken to protect it from
damage.
NOTE
We recommend that the unit should be stored at a temperature of
≥
5 °C for a period of
24 hours prior to any handling so that any ice crystals formed by condensation water
can melt.