2.13
Danger zones
Please observe the following notes:
•
In the event of malfunctions, shut down the control top (disconnect from the
power and air supply) and secure it against being used.
•
Before starting any service, maintenance or repair work, disconnect the
control top from the power supply and secure it against inadvertently being
switched back on again.
•
Only allow a qualified electrician to carry out any work on the electrical power
supply.
•
Check the electrical equipment of the control top at regular intervals.
Immediately remedy loose connections and molten cables.
•
If work on live parts cannot be avoided, call in a second person, who can
operate the main switch in case of an emergency.
Safety
Danger zones
430BAL013985EN_6
28
25.04.2023
