6.3.2
Setting up and aligning the pump unit
The pump is designed for horizontal and vertical operation.
Fig.4:
Permissible setups of the pump
Aligning the pump:
1.
Level the unit via the machined planar surfaces of the ports using a machine
spirit level.
2.
After aligning the unit, tighten the fastening screws evenly in a crosswise
sequence (where applicable).
→ The pump unit has been set up and aligned.
6.3.3
Installation in the piping system
P
M
P M
Fig.5:
Installation in the piping system
top: Inlet operation | bottom: Suction operation | P - Pump | M - Motor
6.3.3.1 Space requirements
Maintain the following minimum distances.
Pay attention to motor performance.
Assembly and installation
Setup, installation, and connection
BA.H2A.KYY.001.GB_2
26
27.02.2018