Installing the motor, motor stool and pump shaft
Hint!
The steps of Figure 23, Page 55 to
Figure 31, Page 57 show the installation
of the flushed mechanical seal.
For versions with a single mechanical
seal (without seal cartridge), continue
from Figure 32, Page 57.
Wet radial packing ring (0421.06) with water and
push it into the seal cartridge (0491.00). Use
mounting sleeve.
Fig.23:
Radial packing ring
Insert the retaining ring 0932.09 into the seal
cartridge (0491.00).
Fig.24:
Circlip
Wet hex socket screws (0914.05) with Loctite 243
and connect the intermediate motor stool
(0346.00) with the motor stool (0340.00).
Torque M8: 10 Nm.
Fig.25:
Loctite 243
Moisten the O-ring (0412.02) and insert it into the
seal cartridge (0491.00).
Fig.26:
O-ring
Malfunctions / repairs
Repair
BA.H2A.KYY.001.GB_2
27.02.2018
55