Decommissioning
Final decommissioning/disposal
2018-9015-001
09-2016
Store
Note!
If using a PTO driveline, refer to the instruction manual and follow the
manufacturer's recommendations.
● Place the product in a storehouse after cleaning to protect it against the
elements and prevent premature corrosion;
● Turn off the tractor engine;
● Place wheel chocks, one at the front
and one behind a wheel of the
spreader;
● Raise the spreader draw bar using a
jack;
● Disconnect the PTO driveline (if
applicable);
● Disconnect all hydraulic and
pneumatic hoses and hook them on
the support;
● Disconnect the spreader from the
tractor draw bar;
● Remove the ball from the hitch;
● Clean the grease chamber (1) and
the ball (2) using a clean cloth and
gasoline;
● Apply grease in the grease
chamber;
● Reinstall the ball (2) and the dust
cover (3).
1
2
3
10.4
Final decommissioning/disposal
After final decommissioning, handle all components properly and dispose of
them in accordance with your valid local rules and regulations on waste
disposal. Recycle if possible.
