Maintenance
Lubricate the tool bar (option)
2018-9015-001
09-2016
9.18
Torque bolts
Every 200 hours of use
Check torque of :
● mudguard and fender bolts;
● dust shield bolts;
● transportation support bolts;
● components fastened on the spreader.
Refer to section Technical data - Bolt torque chart.
9.19
Change the oil of bearing housing (if applicable)
Every 200 hours of use
Note!
Use 80W-90 TRAXON
TM
gearbox oil (or equivalent).
● Place a container under the drain
plug (1) to collect oil;
● Remove the filling plug (2) located
between the grease fitting and the
air vent;
● Unbolt the drain plug (1);
● Reinstall the drain plug (1) once the
housing is drained;
● Fill with oil until the level reaches the
top of the shaft;
● Clean and reinstall the filling plug (2).
2
1
9.20
Lubricate the tool bar (option)
After each use
Note!
Use grade 2 PRECISION
TM
XL5 MOLY EP2 grease (or equivalent).
● Grease all parts labelled with:
