Safety
Owner’s obligation of care
7
7750-9001-058
07-2006
D
The work to be carried out is performed by a sufficiently qualified person!
Attention!
Particular qualifications are described in the corresponding
chapters!
Work which must be carried out by trained and authorised personnel:
- Transport
- Installation
- Commissioning
- Operation
- Maintenance
- Cleaning
- Troubleshooting
- Repairs
- Shut-down
D
These personnel will be regularly instructed in all relevant matters of safety
at work and protection of the environment and be familiar with the manual,
particularly the safety instructions it contains.
D
Operating personnel who require training may only work on the product
under the supervision of an experienced person. The successful completion
of training is to be confirmed in writing.
D
All safety or warning instructions applied are not removed and remain
legible.
D
Escape routes are marked by means of signs in accordance with national
regulations!
D
The personal protective equipment required for personnel carrying out
operation, maintenance and repairs is made available and used.
D
Unauthorised persons (e.g. children) are not allowed in hazardous areas
and do not have access to cleaning agents or disinfectants.
Danger!
When work is performed on live parts of the machine or on the cables
there is an electrical hazard:
-
from direct contact with live parts or parts which have become
live because of faults.
-
from electrostatic phenomena.
-
from high voltage.
-
from short circuits / overloads, when molten particles may also
be projected.
In the event of fire:
In case of fire switch off the product immediately at main switch.
Special fire-fighting measures are to be followed for
D
electrical cables
D
reference to the build up of smoke and harmful effects
