GE XL Vu+ VideoProbe Operating Manual Download Page 97

Page: 97 / 168

Chapter 5. Operation

XL Vu+™ VideoProbe® Operating Manual

5.7 Still Image Capture and Playback

To save/capture a still image if freeze frame is enabled, press the

right soft

key, with

SAVE

on the

LCD

above, to save to the default location. Alternately,

press and hold

Freeze/Enter

to auto-save.

Note:

For further information see

“General Measurement Procedure” on page 96

5.8 Video Recording and Playback

To record live video, press the

left soft key, labeled

RECORD

on the

LCD

above. A record symbol will appear in the upper right hand corner of the screen.
When the video is stopped, it will automatically save to the default location.

To view recorded videos, use either QuickTime or VLC software. Both applications
are included with the

XL Vu+

system, and are located on the documentation CD.

Summary of Contents for XL Vu+ VideoProbe









































































































































































Search results

Summary of Contents for XL Vu+ VideoProbe

Reviews:

Related manuals for XL Vu+ VideoProbe

Brands by name

Popular brands

GE XL Vu+ VideoProbe, Operating Manual

Search results

Summary of Contents for XL Vu+ VideoProbe

Reviews:

Related manuals for XL Vu+ VideoProbe

Brands by name

Popular brands