GE XL Vu+ VideoProbe, Operating Manual

Page: 32 / 168

Chapter 3. Getting Started
22 XL Vu+™ VideoProbe® Operating Manual
3.12 Proper Use of the Tip Tool (3.9 mm only)
3.12.1 Removing Optical Tips
To remove an optical tip, complete the following steps:
1.
Apply the empty tip tool to the probe head.
2.
Apply pressure while turning the tool counterclockwise.
3.
When the tip tool spins freely, gently pull up while twisting counterclockwise
to release the second set of threads.
4.
Remove the tip tool and the captured tip.
3.12.2 Installing Optical Tips
To install an optical tip, complete the following steps:
1.
Apply the tip tool containing the desired optical tip to the probe head.
2.
Apply pressure on the tool while turning it clockwise.
3.
When the tip tool spins freely, gently push down while twisting the tool
clockwise to engage the second set of threads.
4.
Pull gently on the tip tool to verify proper attachment of the tip to the probe
head.
5.
Remove the tip tool.
IMPORTANT: Never use excessive force to install or remove an optical tip.