GE XL Vu+ VideoProbe, Operating Manual

Page: 28 / 168

Chapter 3. Getting Started
18 XL Vu+™ VideoProbe® Operating Manual
3.7 Battery Charge Level
Check the battery charge by pressing the battery symbol on the front of the battery
(see
Figure 9 below). Each indicator light represents approximately 20% of the
battery charge capacity.
Figure 9: Checking the Battery Charge
3.8 Charging the Battery
Note:
Battery run time approximately equals the battery charge time. Thus, a
four-hour battery will take approximately four hours to charge.
Plug the included AC-to-DC power adaptor into a suitable AC power source and
connect the DC output of the battery charger into the XL Vu+ battery (see Figure 9
above). The LED battery lights will illuminate according to the amount of charge
attained. The system may be operated while charging, but the battery may also be
charged while disconnected from the system.
Note:
When the battery is fully charged, the LED battery lights will turn OFF.
Charge Indicator LED’s
DC Battery Charging Jack