GE WattStation Pedestal Installation Manual Download Page 18

WattStation Pedestal Installation Manual 

1188  

G

GEE  EEnneerrggyy  

©

©22001122  G

GEE  C

Coom

mppaannyy  AAllll  RRiigghhttss  RReesseerrvveedd  

 
 

13

 

LIMITED WARRANTY FOR GE WattStation

TM

 (Pedestal)  (“this Warranty”) 

 

W

WAARRRRAAN

NTTYY   

 
Any one or more of the following actions acknowledges 
that you have read and agree to the terms of this 
warranty agreement: Your use of the G

GEE  W

WaattttSSttaattiioonn  

((PPeeddeessttaall))  packaged with this Instruction Manual (the 
“Hardware”), online product registration of the 
Hardware, or your return of the enclosed Registration 
Card. GE’s warranty obligations for this Hardware 
product are limited to the terms set forth in this Limited 
Warranty and are limited by and subject to the 
Exclusions and Limitations set out below.  

 

GE warrants that this Hardware product shall be free of 
defects in materials and workmanship under normal 
use for a period of 

tthhrreeee  ((33))  yyeeaarrss

  from the date of 

manufacture (the “Warranty Period”). If a defect in the 
Hardware arises and a valid claim is received within 
the Warranty Period, your sole and exclusive remedy 
will be for GE, in its sole discretion and to the extent 
permitted by law, to (1) repair the defect in the 
Hardware at no charge, using new parts or refurbished 
parts, or (2) exchange the Hardware with new or 
refurbished hardware that is functionally equivalent to 
the original Hardware, (the repaired Hardware and the 

exchanged hardware are called the “Remedied 
Hardware”).  Any Remedied Hardware product will be 
warranted for the remainder of the original warranty 
period or ninety (90) days from delivery to the 
customer, whichever is longer. In order to receive the 
remedy set forth above, you must contact GE during 
the Warranty Period at 888-437-3765 and provide the 
model number, serial number and date of purchase.  
Upon GE’s determination that the Hardware product 
should be returned to GE, return the Hardware and 
include with each returned item of Hardware (i) a copy 
of your original purchase invoice or receipt to verify 
your warranty; (ii) your name, address, and telephone 
number; (iii) the Return Materials Authorization  
(RMA) number.  

 

In addition to the foregoing Hardware product 
warranty, during the Warranty Period, GE shall  
also provide telephone (888-437-3765) technical 
support assistance.  

 

Please note that the above warranty obligations of GE 
do nnoott apply to installation service of the Hardware.  

Summary of Contents for WattStation Pedestal





















Reviews: