GE Vscan Extend User Manual Download Page 231

Page: 231 / 251

Introduction

Vscan Extend

–

User Manual

8-5

5721203-100

Rev. D

Audit logging content

The following events are captured by the audit logging of the
Vscan Extend:

1. Device

Start/Shut-down

time

2. Incorrect

password attempts

3. Addition and Modifications to system configuration,

including:

a. DICOM

connection

b. Windows

connection

c. Application software installation/uninstallation/software

upgrade

d. Registration of partnering apps

4. Events related to Patient Data, including details of:

e. Data access Date/Time including type of action

(addition, deletion, modification, reviewed) excluding
the PC connect scenario

Details of applications used (Bladder app, Lung
protocol, etc.)

5. Data

Export

a. Data export Date/Time including end point and Wi-Fi

SSID information

b. Data

Backup/Restore

detail

6. Invalid Device PIN attempt

7. Kiosk admin mode login success and failure

Management of Audit logs

Back up of audit logs

Back up of audit logs can be done by exporting audit logs to an
external device. The export happens through USB export.

Remember that audit logs and exported audit log files do contain
Personal Information (PI) and must be handled according to
applicable regulations and guidelines for handling of PI/PHI.

Note that exported audit log files are stored unencrypted.

Summary of Contents for Vscan Extend



























































































































































































































































Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands

GE Vscan Extend, User Manual

Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands