GE Vscan Extend User Manual Download Page 207

Page: 207 / 251

Upgrade software

Vscan Extend

–

User Manual

6-13

5721203-100

Rev. D

Scanner software (continued)

4. Press

Settings

on the Menu screen.

5. Press

System Settings

6. Press

Upgrade Software

The following message displays:

Current software version is:

New software version is:

7. Press

to proceed with the upgrade.

NOTE:

You cannot upgrade the Scanner software to a software version
lower than the currently installed software. If you try to do so, a
message displays: “Not allowed to proceed”.

The Vscan Extend may have security patches which need an
update.

WARNING

GE is not responsible for any virus affecting the Vscan Extend
device which may result in data loss.

Summary of Contents for Vscan Extend



























































































































































































































































Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands

GE Vscan Extend, User Manual

Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands