GE Vscan Extend User Manual Download Page 206

Page: 206 / 251

Vscan Extend Maintenance

6-12

Vscan Extend

–

User Manual

5721203-100

Rev. D

Upgrade software

Scanner software

You can upgrade the currently installed software to a software
version equal to or greater than your current version.

NOTE:

Before proceeding with the upgrade, ensure that the battery is
fully charged and the charger is plugged in.

To perform a software upgrade:

1. Remove the battery. See ‘To remove the battery’ on

page 3-20 for more information.

2. Remove the microSD card that captures the error log files

from the device (lightly push the SD card holder and pull out
the SD card).

3. Insert the application software microSD card.

Figure 6-3.

Insert SDcard

Summary of Contents for Vscan Extend



























































































































































































































































Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands

GE Vscan Extend, User Manual

Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands