GE M
EDICAL
S
YSTEMS
D
IRECTION
2300164-100, R
EVISION
7
V
IVID
™ 3 P
RO
/V
IVID
™ 3 S
ERVICE
M
ANUAL
Chapter 3 - Installation
3-45
3-6-9
VCR/ECG Tab
1) Press
Config
on the alphanumeric keyboard. The
System Configuration
window is displayed.
2) Trackball to the
VCR/ECG
tab and press
Select
. The
VCR/ECG
tab is displayed, as shown below:
Figure 3-27 VCR/ECG Tab
3) In the
VCR Options
area, complete the following, as required:
•
Select the appropriate VCR from the
VCR Model
dropdown list, for example,
Sony
,
JVC
, or
Panasonic
.
•
Select the video system from the
Video Mode
dropdown list, for example, PAL or NTSC.
•
Select the
SmartVCR
option to enable Measurement and Analysis measurements and
calculations on recorded VCR images.
•
Select the
Patient Name on second line
option to display the patient’s name on the second
line. For use when an external monitor omits picture borders.
4) If done, trackball to the
OK
button and press
Select
.
Note:
To test the VCR option, insert a video cassette. Refer to the
Peripherals
section, on page 4-4.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
