GE VG4065, User Manual

Page: 6 / 68

FIRST THINGS FIRST
4
Step 1: What’s in the Box?
The following items come packed in the box:
• VCR
• Remote control
• RF coaxial cable
Step 2: Install Batteries in the Remote
Control
Follow these steps whenever you need to install or change the
batteries in your VCR’s remote.
1. Remove the cover of the battery compartment.
2. Place the batteries into the remote’s back panel. Match the
positive (+) and negative (–) ends of each battery to the
diagram inside the battery compartment.
3. Replace the cover.
Step 3: Connect Your VCR
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR’s IN (FROM ANT.) and OUT (TO
TV) jacks for a good signal as shown to the right.
If you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection. Refer to the section, Connections, toward
the back of the manual, for additional connection options.
Step 4: Plug in the VCR
Your VCR’s power cord has a plastic band strung through the
blades. Remove plastic band before plugging the cord
into the power outlet . To remove band, cut with a pair of
scissors and pull it free of the blades. Once the plastic is
removed, match the wide blade of the power cord to the wide
slot in the AC outlet. Be sure to insert the plug completely.
VCR
TV
CH
IN
OUT IN
AUDIO
VIDEO
3 4
(FROM ANT.)
OUT
(TO TV)
RF
CABLE/
ANTENNA
CABLE, CABLE BOX, OR ANTENNA
IN
PUT
TV
•VCR
REVERSE PLAY
FORWARD
RECORD STOP
PAUSE
INFO
SEARCH
MUTE
GO BACK
1 2
3
4 5
6
7
8 9
0
F.ADV
CLEAR
MENU SPEED
CHAN
V
O
L V
O
L
CHAN
TV
VCR
TRACKING
OFF