GE VG4065, User Manual

Page: 35 / 68

33
RECORDING
Copying and Editing Tapes
Using Two VCRs
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram below.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV’s
video input).
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4—the one selected on the
playback VCR.
If you are using audio/video cables, select the line input on
the
recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the
recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6–9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
PLAYBACK VCR
CABLE BOX
OR ANTENNA
RECORDING VCR
TO TV TO TV
CH
IN
OUT IN
AUDIO
VIDEO
3 56 4
(FROM ANT.)
OUT
(TO TV)
RF
CH
IN
OUT IN
AUDIO
VIDEO
3
56
4
(FROM ANT.)
OUT
(TO TV)
RF
IN
OUT
OR
OR
Two VCR Connection
Note that the two VCRs used in the diagram may not look
exactly like the VCRs you are connecting. The important thing
is to match the proper cable connections; OUT jacks of the
playback VCR connect to IN jacks of the recording VCR
. Also
keep in mind that R output jacks connect to R INPUT jacks, L
output to L input, and VIDEO out connects to VIDEO in.