manualshive.com logo in svg

GE Versana Essential, Technical Publication

Share
Download
GE Versana Essential Technical Publication Download Page 254

Safety

4-46

Versana Essential

 – 

User Guide

5759238-100 English

 

Rev. 2

Probe Label Explanation

The following information appears on all probe labels, 
regardless of the connector type, except for “IPX7”, “CE Mark”, 
and “XDclearTM” which only appears on applicable probes.

NOTE: 

The probe label displayed in this manual is only for illustrational 
purposes. Refer to the actual probe label for the specific 
information. 

 Figure 4-4. Probe label

NOTE: 

Non-GE probes will also have a UDI symbol and equivalent 
information.

1. GE 

Logo

2.  Probe Model (Name)
3.  UDI Symbol and Data Matrix
4.  UDI Human Readable Label Text: Global Trade 

Item Number, GTIN, (01), Manufacturing Date 
(11), Serial Number (21)

5.  Type BF/CF Applied Part
6.  Caution: Consult the Manual
7.  WEEE Waste Symbol

8.  Chinese RoHS Hazardous Substance Symbol
9.  CE Mark and Notified Body Number
10.  REF: Catalog/model number
11. Serial Number
12.  Manufacturer’s site country of origin
13.  Legal Manufacturer’s Name and Address
14.  Date of Manufacture, as YYYY-MM
15. IP Classification

Summary of Contents for Versana Essential


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands