GE Versana Essential Technical Publication Download Page 172

Page: 172 / 305

After The Exam Is Over

3-32

Versana Essential

–

User Guide

5759238-100 English

Rev. 2

Cleaning the system

Prior to cleaning any part of the system:

1. Turn off the system power. Disconnect the power cord. See

‘Power Off’ on

page 1-38 for more information.

System Cabinet

To clean the system cabinet:

1. Moisten a soft, non-abrasive folded cloth with a mild,

general purpose, non-abrasive soap and water solution.

2. Wipe down the top, front, back, and both sides of the system

cabinet.

NOTE:

Do not spray any liquid directly into the unit.

Operator Control Panel

To clean the operator control panel:

1. Moisten a soft, non-abrasive folded cloth with a mild,

general purpose, non-abrasive soap and water solution.

2. Wipe down operator control panel.
3. Use a cotton swab to clean around keys or controls. Use a

toothpick to remove solids from between keys and controls.

NOTE:

When cleaning the operator control panel, make sure not to spill
or spray any liquid on the controls, into the system cabinet, or in
the probe connection receptacle.

NOTE:

In case of SARS, use bleach, alcohol, or Cidex in a normal
diluted form for cleaning/disinfecting the operator panel.

NOTE:

DO NOT use T-spray or Sani Wipes on the control panel.

WARNING

Ensure that you follow the cleaning procedure and use the
cleaning agents provided in this manual.

Summary of Contents for Versana Essential

















































































































































































































































































































Search results

Summary of Contents for Versana Essential

Reviews:

Brands by name

Popular brands

GE Versana Essential, Technical Publication

Search results

Summary of Contents for Versana Essential

Reviews:

Brands by name

Popular brands